PUFF-Ver.1.0.3 is the correct Boot Version you should be using. If using PUFF-Ver.1.0.2 you will need to upgrade yet again. The older one has problems that have been fixed.
The following is the original reason for the boot change and the directions from upgrading to the newer file. Please note that the 01-19 ECM 206 Fix by Ukronics for PUFF did not require the new boot, the other JVVH release however was released using LZMA and is supposed to be how all future files will be based from this point on. We shall see...
All the Files You Need Will Be Posted at the Bottom of this thread.
Quote:
Well the time has come, where things have progressed far enough that further measures are needed to prolong the death of these beloved boxes.
-PUFF-boot_Ver.1.0.2 is a boot file that WILL be required from this point on to continue the lifespan of the box for the time being AND boots up in a little more then 10 seconds.(displaying P.U.F.F. P.U.F.F.)
1)Open UkRoNiC's BOX Updater .421 Loader.
FILE, Choose -PUFF-boot_Ver1.0.2 bin.
Turn receiver ON and " LET Reciever Fully Boot To ON or channel #.
Hit Download on Loader.
When it completes continue..
2). Open Jvvh TeamPUFF Loader or UkRoNiC's BOX Updater .420
Choose Ukr_Jvvh-Team-PUFF_(Lzma)_V206 bin.
Turn receiver ON and first " P. " Hit Download.
When it completes, your good to go.
If need be we will also make older bins to suit downtime issues (if one can be done and a new one isnt required)
Attachment:
File comment: This is the old one you do NOT want
-PUFF-Ver.1.0.2.zip [956.72 KiB]
Downloaded 121 times
^ * This is the old file - DO NOT INSTALL
Attachment:
File comment: This is the NEW boot file You Want!
Fwank7-PUFF-boot_Ver.1.0.3.zip [19.55 KiB]
Downloaded 285 times
^
*** This is the new boot version file that you will likely need for the next ECM fix ***And Here are the installation instructions:
Quote:
If you already use the PUFF_VER1.0.2 boot all you have to do is.
Open UkRoNiC's BOX Updater .421. Loader.
Open PUFF_VER1.0.3 bin into Loader.
Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ".
Hit download on Loader.
Write will complete in 10 seconds then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
For those that have not used the PUFF_VER`1.0.2 boot this is what you need to do.
1). Open UkRoNiC's BOX Updater .421. Loader.
Open PUFF_VER1.0.3 bin into Loader.
Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ".
Hit download on Loader.
Receiver will reboot with P.U.F.F. P.U.F.F. and will get stuck on " F. ".
Turn receiver OFF from back switch.
2). Open Jvvh-Team-PUFF Loader.
File, choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V206 bin.
Turn receiver ON and soon as you see the " P. ".
Hit download on Loader.
Write will complete in 2 minutes then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
When loading the V206 bin make sure it is the v206 bin that has (Lzma) in the bin name or your receiver will get stuck on " F. ". Remember i did send you two different V206 bins the right one was in the PUFF_VER1.0.2 folder.
So I am attaching again the V206_(Lzma) bin you need to use or just wait for a new bin...
Attachment:
File comment: Last ECM Fix for PUFF (Lzma)
Fwank7_Jvvh-Team-PUFF_(Lzma)_V206.zip [398.11 KiB]
Downloaded 144 times
^ * NOT THE CURRENT FIX * Fixed 01/19 ECM Only
FAQ
Search
Toolbar
Login
Register
